Campbell-scientific CR3000 Micrologger Uživatelský manuál stáhnout pdf (Strana 209)

100

101

Section 7. Installation

209

MarksandSpaces

RS‐232signallevelsareinvertedlogiccomparedtoTTL.Thedifferent

levelsarecalledmarksandspaces.Whenreferencedtosignalground,

thevalidRS‐232voltagelevelforamarkis‐3to‐25,andforaspaceis

+3to+25with‐3to+3defin

edasthetransitionrangethatcontainsno

information.Amarkisalogic1andnegativevoltage.Aspaceisalogic0

andpositivevoltage.

MSB

Mostsignificantbit(theleadingbit).

RS‐232C

Referstothestandardusedtodefinethehardwaresignalsandvoltage

levels.TheCR3000supportsseveraloptionsofseriallogicandvoltage

levelsincludingRS‐232logicatTTLlevelsandTTLlogicatTTLlevels.

RX

Receive

SP

Space

Startbit

Isthebitusedtoindicatethebeginningofdata.

Istheendofthedatabits.Thestopbitcanbe1,1.5or2.

TX

Transmit

7.8.8.5 CRBasic Programming

To transmit or receive RS-232 or TTL signals, a serial port (see table CR3000

Serial Ports

(p. 207) ) must be opened and configured through CRBasic with the

SerialOpen() instruction. The SerialClose() instruction can be used to close the

serial port. Below is practical advice regarding the use of SerialOpen() and

SerialClose(). Program CRBasic example Receiving an RS-232 String

(p. 215)

shows the use of SerialOpen(). Consult CRBasic Editor Help for more

information.

SerialOpen(COMPort,BaudRate,Format,TXDelay,BufferSize)



• COMPort — Refer to CRBasic Editor Help for a complete list of COM ports

available for use by SerialOpen().

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 589 590

Komentáře k této Příručce

Žádné komentáře

Campbell-scientific CR3000 Micrologger Uživatelský manuál Strana 209

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje Campbell-scientific CR3000 Micrologger