Campbell-scientific RAWS-H Remote Automated Weather Station Uživatelský manuál stáhnout pdf (Strana 13)

RAWS-H Remote Automated Weather Station

TABLE 4-6. FM/FT Connector (color coded brown)

Connector Pin Description CR1000 Terminal

A CS205 Temperature Signal 4L

B Sensor Ground

C CS205 Temperature Excitation VX1

D CS506 FM Enable C8

E CS506 FM Signal 4H

F CS506 FM 12 V 12V

4.6 Barometric Pressure

The barometric pressure sensor (pn CS100-QD) is mounted inside the RAWS

environmental enclosure and the sensor wires are attached to the CR1000

printed circuit board wiring panel.

TABLE 4-7. CS100-QD Wiring

CS100 Wire Color CR1000 Terminal

Blue 5L

Yellow

Red 12V

Clear G

Black G

Green C4

The CS100 is sensitive to static when the back plate is

removed. To avoid damage, take adequate anti-static

measures when handling this sensor.

CAUTION

5. Equipment Wiring and Troubleshooting

5.1 Solar Panels

5.1.1 General Description

The RAWS solar panel is a photovoltaic power source used for charging lead

acid batteries. The SP20-Handar 20 watt solar panel is used for system

configurations that have higher-than-average power requirements. It is also

recommended for use at higher elevations and latitudes. The solar panel

should be mounted facing the equator.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Žádné komentáře

Campbell-scientific RAWS-H Remote Automated Weather Station Uživatelský manuál Strana 13