Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Uživatelský manuál stáhnout pdf (Strana 26)

CS700 and CS700H Rain Gage

7.2 Reassembling the CS700

1. Screw cap on stem, finger tighten only (see Figure 7-3).

2. Push stem into siphon body (see Figure 7-3).

3. Replace nut and tighten (see Figure 7-3).

Do not over tighten.

CAUTION

4. Push filter/siphon assembly back into place (see Figure 7-4).

Do not twist the filter/siphon assembly while putting it back

into place.

CAUTION

To re-assemble,

push the

filter/siphon

assembly back

in place.

Do not twist.

FIGURE 7-4. Reassembling the CS700

5. Place the housing assembly back onto the base and tighten the three

screws that secure the housing onto the base.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

Žádné komentáře

Campbell-scientific CS700 Tipping Bucket Rain Gage and CS700H Heated R Uživatelský manuál Strana 26