Campbell-scientific CMP6-L, CMP11-L, and CMP21-L Pyranometers Uživatelský manuál stáhnout pdf (Strana 36)

Appendix A. CVF3 Heater/Ventilator

A.3 CVF3 Installation

The CVF3 heater/ventilator unit includes the heater/ventilator unit, white

cover, cable, and mounting hardware.

Tools required for mounting to a tripod or tower are:

• Small and medium Phillips screwdrivers

• 5/16”, 1/2” open end wrenches

• 5/32” Allen wrench

• Tape measure

• UV-resistant wire ties

• Side-cut pliers

• Compass

• Step ladder

To install, do the following:

1. Remove leveling screws from the pyranometer.

2. Fit the pyranometer in the upper plate of the CVF3 (see FIGURE A-2).

3. Use the counter sink screws, nylon rings, and nuts to secure the upper plate

of the CVF3 with the lower portion of the unit (see FIGURE A-2).

FIGURE A-2. Pyranometer mounted to the CVF3

Nylon Ring

A-2

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

Žádné komentáře

Campbell-scientific CMP6-L, CMP11-L, and CMP21-L Pyranometers Uživatelský manuál Strana 36