Campbell-scientific NL200/NL201 Network Link Interface Uživatelský manuál stáhnout pdf (Strana 43)

Appendix B. Cables, Pinouts, LED Function, and Jumper

B.6 LEDs

TABLE B-6. Power LED

State

Description

Off

Device powered off

On Device powered on and ready

Blink

OS Download in progress – DO NOT DISCONNECT POWER

TABLE B-7. Ethernet LED

State

Description

Yellow On Valid Ethernet link

Yellow Off

Ethernet link not valid

Yellow Blink

Activity on Ethernet port

Green On

100Mbit/s link

Green Off

10Mbit/s link

B.7 Power Jumper (NL201 only)

If you wish to prevent the NL201 from being powered over the CS I/O port,

remove the two screws on the top of the NL201, remove the NL201’s top

cover, remove the jumper indicated below and place it so that it is connected to

only one post. With the jumper connected to only one post, the NL201 can only

be powered from the barrel connector. With the jumper connected to both

posts, the NL201 can be powered from the CS I/O port or from the barrel

connector.

B-3

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 59 60

Žádné komentáře

Campbell-scientific NL200/NL201 Network Link Interface Uživatelský manuál Strana 43