Campbell-scientific ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures Uživatelský manuál stáhnout pdf (Strana 44)

Appendix C. 28960 Stack Mounting Kit

C-4

C.2 Mounting Procedure

1. Determine the spacing needed between the two legs.

2. Secure the legs to the back plate using screws and grommets. If a

component is to be mounted under another and shares the same mounting

holes as the leg, mount the pieces in the following order.

Back Plate < Grommet < Leg < Component < Screw

3. Fully wire the bottom component before proceeding.

4. Place the Top Grid in position over the Legs. Insert Grommets where

required for the component to be mounted. If the Top Grid is not going to

be used, insert the Grommets directly into the top of the Legs.

5. Place the top component in position and secure it with Screws.

1 2 ... 39 40 41 42 43 44 45 46 47 48

Žádné komentáře

Campbell-scientific ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures Uživatelský manuál Strana 44