Campbell-scientific CS300 Silicon Pyranometer Uživatelský manuál stáhnout pdf (Strana 14)

CS300 Pyranometer

7.2 Mounting to an Instrument Mount

7.2.1 Required Tools

Tools required for installation on a tripod or tower:

Small and medium Phillips screwdrivers

1/2 in open end wrench for CM225 or 015ARM

Tape measure

UV-resistant cable ties

Side-cut pliers

Compass

Step ladder

7.2.2 Mounting Procedure

7.2.2.1 CM225 Solar Sensor Mounting Stand

1. If mounting the CM225 directly to a mast, place the CM225’s U-bolt in

the side holes and secure the CM225 to the mast by tightening the U-bolt

nuts.

2. If mounting a CM225 on a CM200-series crossarm, mount the crossarm to

the tripod or tower. Then place the CM225’s U-bolt in the bottom holes

and secure the CM225 to the crossarm by tightening the U-bolt nuts.

CM225 Stand

U-bolt Nuts

CM225 Stand

CM200-Series Crossarm

U-bolt Nuts

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Žádné komentáře

Campbell-scientific CS300 Silicon Pyranometer Uživatelský manuál Strana 14