Campbell-scientific AP200 CO2/H2O Atmospheric Profile System Uživatelský manuál Strana 116

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 120
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 115
Appendix J. AP200 Pump Replacement
FIGURE J-6. Location of cuts to remove pump assembly from tubing
8. Remove the pump from the assembly.
J.3 Installation
To reinstall the AP200 pump, carry out the following steps:
1. Position the pump with the label up and connect the coiled tubing on
both sides of the pump (see FIGURE J-7). Blue tubing connects the
inlets and red connects the outlets as directional arrows show on the
side of the pump (FIGURE J-8).
FIGURE J-7. Inlet and outlet tubing reconnected to pump
J-4
Zobrazit stránku 115
1 2 ... 111 112 113 114 115 116 117 118 119 120

Komentáře k této Příručce

Žádné komentáře