Campbell-scientific SDM-CD8S 8 Channel Solid State DC Control Module Uživatelský manuál stáhnout pdf (Strana 29)

SDM-CD8S 8 Channel Solid State DC Control Module

'Load Sequence Timing Array

For I = 1 To 10

'Load the Valve and Timing Array with the valve Settings:

ValveTime(I,1) = SiteValve(SiteSequence(I))

'Load the Valve and Timing Array with the number of scans at each setting:

ValveTime(I,2) = 30

Next I

'Initialize Variables

One=1

SeqIndex=1

Count = 1

SeqActiveFlag = True

Site = SiteSequence(SeqIndex)

SiteOutput = Site

Scan (1,Sec,10,0)

'Instructions to Measure Sensors Inserted Here.

'Set valves:

SDMCD16AC (ValveTime(1,1),1,1)

'Call Data Tables:

CallTable RawData

CallTable SiteAvg

Count = Count + 1

SiteOutput=Site

If SiteAvg.Output(1,1) Then Count = 1 'Reset Count when the

'Site average is output

If SeqActiveFlag Then

Site = SiteSequence(SeqIndex) 'Show the site number set by

'the Timed Control

If SeqProgrammedFlag = False Then 'Reset the first valve to

'the automatic value

ValveTime(1,1) = SiteValve(1)

ValveTime(1,2) = 30

TimedControl(10,2,Min,1,SeqIndex,ValveTime,2)

SeqProgrammedFlag = True

EndIf

Else 'Set the first valve setting to that for the current Site

'The Site number may be changed by user to switch sites.

ValveTime(1,1) = SiteValve(Site)

ValveTime(1,2) = 0

If SeqProgrammedFlag = True Then 'Set the timed control to only

'use The first value

TimedControl(1,0,Min,SiteValve(Site),SeqIndex,ValveTime,1)

SeqProgrammedFlag = False

EndIf

SiteValveCD16 = SiteValve(Site)

EndOmit = Count > OmitCounts(Site)

AvgDisable = NOT (EndOmit AND SeqActiveFlag)

NextScan

EndProg

1 2 ... 24 25 26 27 28 29 30 31 32

Komentáře k této Příručce

Žádné komentáře

Campbell-scientific SDM-CD8S 8 Channel Solid State DC Control Module Uživatelský manuál Strana 29

Komentáře k této Příručce

Související produkty a manuály pro Hardware Campbell-scientific SDM-CD8S 8 Channel Solid State DC Control Module