Campbell-scientific Redwing100 CDMA Cellular Digital Modem Uživatelský manuál stáhnout pdf (Strana 9)

A-1

Appendix A. Configuring Modem with a

Terminal Emulator

Programming the modem with a terminal emulator is not

recommended. Please first attempt programming with the

CellWizard.exe program available from Campbell Scientific, Inc.

Items needed:

• Computer with a COM port.

• 9-pin cable to connect between the computer and the Redwing.

• A terminal program on the computer “HyperTerminal”.

• 12 volt DC applied to the Redwing.

• Antenna on the Redwing (for over-the-air updates).

• CDMA account.

A.1 HyperTerminal Setup

Under “Connect using”, select the COM port you will be using.

Set COM Properties to:

Bits per second (baud) = 115200

Data bits = 8

Parity = None

Stop bits = 1

Flow control = None

NOTE

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Žádné komentáře

Campbell-scientific Redwing100 CDMA Cellular Digital Modem Uživatelský manuál Strana 9